Skip to contentSkip to content
Slat GatesAluminium

Supply + installation

Aluminium Slat Gates & Fencing in Sydney

Sydney is where we do both halves of the job: we measure the opening, manufacture to those measurements and install. It is the difference between a gate that fits and a gate that nearly fits.

Get a Sydney quoteInstallation detail
Pair of black aluminium horizontal slat gates closed across a carport opening between a brick wall and a besser-block wall

Why it matters

Measured, then made

Almost every problem with a gate traces back to a measurement. An opening that is 20mm narrower at the bottom than the top, a driveway that falls 60mm across its width, a brick pier that is not plumb — none of those are unusual, and all of them change how a gate has to be built.

When we are installing, we take those measurements ourselves. That means the tolerances are our problem rather than yours, and the gate that turns up is the gate that fits the opening it was made for.

Sydney also brings its own conditions. Coastal suburbs carry salt exposure that affects finish choice. The harbour foreshore and the northern suburbs bring steep, sloping ground where a panel has to rake or step. Inner-city terraces bring openings that were set out by a bricklayer a century ago. Each of the council pages below covers what is specific to that area rather than repeating this page with a different name on it.

The process

What a Sydney job actually looks like

  1. 01

    Enquiry

    You send the opening size, the style you are after and a photo of the site. Approximate measurements are fine at this point.

  2. 02

    Site visit and measure

    We measure the opening properly, check what the gate or fence will fix to, and look at ground levels, access and where posts can actually go.

  3. 03

    Quote and specification

    You get a quote for your project — the style, the dimensions, the colour, the hardware and whether new posts are included.

  4. 04

    Manufacture

    The gate or fencing is fabricated to those measurements and powder coated in the colour you selected.

  5. 05

    Installation

    We install, set the gate to swing or slide correctly, fit the hardware and leave the site clean.

Council areas

Where we install across Sydney

Each page covers the housing stock, terrain and exposure of that area and how they change what should be specified.

City of Sydney

Terraces, courtyards and narrow frontages where every millimetre of the opening counts.

Inner West

Federation semis, Victorian terraces and rear lanes — period frontages with modern rear yards.

Northern Beaches

Salt air, steep driveways and bushland edges. Specification matters more here than anywhere.

Woollahra

Period homes and high design expectations, with heritage controls across much of the LGA.

Randwick

Coastal-adjacent eastern suburbs with a mix of period homes, post-war blocks and pools.

Waverley

Bondi and surrounds: dense, coastal, overlooked, and short on space to swing anything.

Sutherland Shire

Larger blocks, waterfront streets and bushland edges across the southern suburbs.

Georges River

Hurstville, Kogarah and the river suburbs — established homes and a lot of sloping blocks.

Bayside

Rockdale to Botany: flat blocks, exposed bay frontages and a lot of boundary fencing.

Canterbury-Bankstown

Large, established LGA with a strong rebuild market and wide driveway frontages.

Parramatta

A wide mix from heritage cottages to new medium density across Sydney's second CBD.

Blacktown

New estates with level blocks, standard crossovers and Colorbond boundaries to match.

The Hills Shire

Larger newer homes, wide driveways and a strong demand for automated entry gates.

Ku-ring-gai

Leafy, sloping, heavily treed blocks with significant heritage and tree controls.

Hornsby

Large blocks, bushland edges and steep driveways through Sydney's northern bushland fringe.

Ryde

Established northern suburbs with a busy renovation and duplex market.

Liverpool

Established suburbs alongside fast-growing estates in Sydney's south-west.

Penrith

Level estate blocks and established suburbs at the foot of the Blue Mountains.

Camden & Campbelltown

The south-west growth corridor, from new estates through to semi-rural acreage.

Willoughby, Lane Cove & Lower North Shore

Established north shore suburbs: mature gardens, sloping blocks and design-conscious frontages.

Canada Bay, Burwood & Strathfield

Grand period frontages alongside dense modern infill across the inner west's outer edge.

Cumberland & Fairfield

Established western suburbs with a strong rebuild market and wide, formal frontages.

Products

What we install in Sydney

Horizontal Slat

Flat slats running left to right. The modern default.

GatesFencing

Vertical Slat

The same flat slat profile, turned on end.

GatesFencing

Louvre

Angled blades: privacy from the street, airflow through.

GatesFencing

Vertical Picket

Classic picket proportions, in powder-coated aluminium.

GatesFencing

Questions

Sydney — questions we get asked

Do you install anywhere in Sydney?
Installation covers the Sydney metropolitan area. Whether a specific job is viable depends on the site rather than the suburb — access for materials, working room at the opening and what the gate or fence is fixing to all matter more than distance. Send your address with the enquiry and we will confirm.
Do you measure on site, or do I measure?
For supply-and-install work in Sydney we take the measurements ourselves, because we are the ones responsible for the gate fitting. If you send approximate figures with your enquiry we can quote from those, then confirm on site before anything is manufactured.
Can you match an existing fence or gate?
Often, yes. Send photos of what is there along with a close-up of the profile and any colour name you have. We can tell you honestly whether it is a match, a close match or a deliberate contrast — matching an unknown powder-coat colour exactly is not always possible.
How long does installation take?
That depends entirely on the job. A single pedestrian gate onto existing posts is a very different day to a driveway gate with new posts set in concrete and an automation fit-out. We give you a timeframe with the quote rather than a generic number here.
Do you supply if I want my own installer to fit it?
Yes. Supply-only is available across Sydney exactly as it is elsewhere in Australia. In that case the measurements are yours to provide and yours to be right, so read our measuring guide before you send them.