Custom-made to your opening · Supplied Australia-wide · Installed across Sydney
South-Western Sydney · Sydney installation
Large, established LGA with a strong rebuild market and wide driveway frontages.
Local context
Canterbury-Bankstown has one of the most active knock-down-rebuild markets in Sydney, and that shapes the work. New two-storey homes on established blocks typically come with a wide driveway, a full-width front fence and an expectation that the gates, fencing and the house all read as one design.
Those frontages are usually where the double-versus-sliding decision gets made. A wide opening with a deep setback can take a pair of swing leaves comfortably; the same opening on a shallow setback with cars parked close behind needs a slider. It is worth resolving before the driveway is poured, because a sliding gate's run-back and any conduit for automation are much easier to allow for at that stage.
Elsewhere in the LGA the work is more conventional: boundary fence replacement on established blocks, and side-access gates on original post-war homes.
Recommended
Based on the housing, terrain and exposure described above — not a fixed rule, and every project gets specified on its own merits.
Horizontal Slat
One leaf, hung on hinges, with flat aluminium slats running the width of the gate. The workhorse of side access — built to your opening rather than cut down from a stock size.
Louvre
A single hinged leaf with angled louvre blades. Near-solid privacy from the street without the weight and wind load of a solid gate.
Vertical Slat
The flat slat profile turned on end, in a single hinged leaf. Adds height to a frontage and handles ground fall better than a horizontal panel.
Bankstown · Canterbury · Campsie · Punchbowl · Revesby · Padstow · Greenacre · Chester Hill · Earlwood · Panania
This is a representative list rather than a boundary. If your suburb is inside the Sydney metropolitan area, ask — installation availability depends on the site rather than the postcode.
Nearby
Questions
