Made to your opening
Custom Aluminium Slat Gates
Designed around your property, your dimensions and the way you want the gate to look. Every gate is fabricated to the opening it will hang in — not cut down from a stock size.
Privacy, done properly
Premium Slat Fencing
Horizontal, vertical, louvre and picket fencing with the slat spacing set to the privacy you actually want. Clean architectural lines, made to measure.
Supply only
Supplied Australia-Wide
Send your measurements and we will build the gate or fencing to suit, then deliver it anywhere in Australia for your own installer to fit.
Supply + installation
Sydney Installation Available
Across the Sydney metropolitan area we measure, manufacture and install — so the gate that arrives is the gate that fits.
01 / 04
- Supply
- Australia-wide delivery on made-to-measure products
- Installation
- Across the Sydney metropolitan area
- Every product
- Built to your dimensions in aluminium
- Licensed
- NSW fencing licence 269038C
- Experience
- 15+ years fencing
- Free site measure
- Across Sydney
Published so you can check it.
Residential, Commercial, Government, Industrial.
Measured and quoted at no cost. Interstate, send your sizes.
Shop by style
Four ways to fill a frame
The frame is the same engineering problem every time. What changes is what goes in it — and that decides how private the gate is, how it reads from the street and how it handles wind and slope.
Shop fencing
Fencing in the same four styles
Panels for straight, level runs. Custom runs for everything else — slopes, steps, curved boundaries and bays that are all different widths.
How we work
Two ways to buy, and we are precise about which is which
A lot of fencing sites blur supply and installation together until you are on the phone. We would rather you knew before you enquired.
Supply only
Australia-wide
You send measurements, we build the product and deliver it. Your builder, fencer or installer fits it. Available in every state and territory.
Supply detailsSupply + installation
Sydney
We measure on site, manufacture to those measurements and install. Available across the Sydney metropolitan area, subject to site access.
Installation detailsPopular configurations
Where most projects start
Each of these is a starting point rather than a fixed product. Choose the closest one, set your dimensions on the page and send it through.
Horizontal Slat
Aluminium Horizontal Slat Double Gates
Two leaves meeting in the middle, with horizontal slats running continuously across both. The standard answer for a driveway.
View productEnquire about price
Louvre
Aluminium Louvre Slat Double Gates
A matched pair of louvre leaves across a driveway. The most private gate we build that still lets air through.
View productEnquire about price
Vertical Slat
Aluminium Vertical Slat Single Gates
The flat slat profile turned on end, in a single hinged leaf. Adds height to a frontage and handles ground fall better than a horizontal panel.
View productEnquire about price
Vertical Picket
Aluminium Vertical Picket Slat Sliding Gates
Picket styling on a gate that runs sideways. Light, open, and useful where there is no room for leaves to swing.
View productEnquire about price
Why buy here
Four things we will actually commit to
Materials and workmanship are covered by the consumer guarantees under Australian Consumer Law. Ask us about the cover that applies to your product before you order.
About us- Made to measure, not adjusted to fit
- Frames are cut to your opening and the slat setout is worked so the pattern lands correctly top and bottom. No packers, no oversized gap at one end.
- Aluminium, so it does not rust
- The failure mode that ends steel gates — corrosion working out from welds and fixing points — simply does not apply. The finish is powder coat, not paint.
- Four styles, one conversation
- Horizontal, vertical, louvre and picket all come from the same shop, so you can compare them properly instead of being sold whichever one we happen to stock.
- A real price, not a range
- Send the opening size and a photo and you get a quote for that gate. There is no list price on a made-to-measure product, and we will not pretend otherwise.
Compare
Not sure which style you want?
The differences are mostly about privacy, sightlines and how the panel copes with sloping ground. Here is the short version.
Guides
Work out what you need before you spend
Written to answer the questions we get asked most, including the ones where the honest answer is 'it depends'.
Gates6 min read
What are aluminium slat gates?
An aluminium slat gate is a welded aluminium frame filled with spaced slats. Everything else — how private it is, how it looks, how it opens — comes down to choices made before it is built.
Read guide →Choosing & Buying5 min read
Horizontal vs vertical slats
Same profile, different direction. The choice is about proportion and how your ground sits, not about privacy — that comes from spacing either way.
Read guide →Gates5 min read
Louvre gates explained
Angled blades instead of flat slats. Louvre gets you close to solid-gate privacy while letting air straight through — but only along the sightline the blades are set against.
Read guide →Sydney installation
Where we install
Installation covers the Sydney metropolitan area. Each council page explains the housing, terrain and exposure that actually change how a gate should be specified there.
Get a price
Tell us the opening size. We’ll tell you what it costs.
Two minutes of measurements and a photo is enough for a proper quote on aluminium slat gates or aluminium slat fencing.