Custom-made to your opening · Supplied Australia-wide · Installed across Sydney
One leaf, hung on one side. The most common gate we make, covering everything from a 900mm side-access gate to a narrow single-vehicle driveway.
4 of 4 products
Horizontal Slat
One leaf, hung on hinges, with flat aluminium slats running the width of the gate. The workhorse of side access — built to your opening rather than cut down from a stock size.
Vertical Slat
The flat slat profile turned on end, in a single hinged leaf. Adds height to a frontage and handles ground fall better than a horizontal panel.
Louvre
A single hinged leaf with angled louvre blades. Near-solid privacy from the street without the weight and wind load of a solid gate.
Vertical Picket
A traditional picket gate built in powder-coated aluminium. Keeps a frontage open and welcoming rather than screened off.
Detail
Best for
A single gate is the simplest arrangement there is, and for most side and rear access openings it is the right one. The whole opening is closed by one leaf, there is one set of hinges to maintain, and one latch to operate.
The limit on a single leaf is weight and arc rather than any fixed number. As the leaf gets wider, the load on the top hinge increases with the leverage, and the space the gate needs to swing through increases with it. Past roughly the width of a single car, a double gate or a sliding gate usually becomes the better answer — not because a single leaf cannot be built that wide, but because it stops being pleasant to use.
The other thing to settle early is the hinge side. It is fixed at fabrication, so decide which way you want the gate to swing and which side it should be hung before the gate is built.
Keep looking
Two leaves meeting in the middle. Driveways and wide openings.
Slides sideways. No swing arc needed.
Flat slats running left to right. The modern default.
The same flat slat profile, turned on end.
Angled blades: privacy from the street, airflow through.
Classic picket proportions, in powder-coated aluminium.
Questions
