Vertical Slat
Aluminium Vertical Slat Single Gates
The flat slat profile turned on end, in a single hinged leaf. Adds height to a frontage and handles ground fall better than a horizontal panel.
View productEnquire about price
Northern Sydney · Sydney installation
Aluminium Slat Gates & Fencing Ku-ring-gai
Leafy, sloping, heavily treed blocks with significant heritage and tree controls.
Local context
Working in Ku-ring-gai
Ku-ring-gai is defined by trees and topography. Blocks are large, generally sloping, and heavily canopied — which affects fencing in ways that are easy to overlook. Leaf litter is constant, so a profile that sheds rather than collects is genuinely worth having. Vertical slats and pickets both drain and clear better than closely spaced horizontal slats under a canopy.
The slope is the other constant. Long boundaries with continuous fall are exactly where a raked vertical run outperforms a stepped horizontal one, and on the deep frontages typical here the difference is visible from the street.
The LGA has extensive heritage conservation areas and significant tree protection controls. Neither is something we can advise on, but both can affect a fencing project — particularly where posts need to go near established trees. Confirm with council before finalising a design.
What we are usually asked for here
- Long boundary runs on sloping blocks
- Front fencing across deep, treed setbacks
- Entry gates on established properties
- Fencing around and between mature trees
- Screening for tennis courts, pools and outbuildings
Site conditions worth planning for
- Heavy leaf litter favours profiles that shed rather than collect
- Continuous slope favours raked vertical runs over stepped horizontal ones
- Tree protection controls can affect post positions — confirm with council
- Heritage conservation areas cover parts of the LGA
Recommended
Styles that suit Ku-ring-gai
Based on the housing, terrain and exposure described above — not a fixed rule, and every project gets specified on its own merits.
Vertical Picket
Aluminium Vertical Picket Slat Single Gates
A traditional picket gate built in powder-coated aluminium. Keeps a frontage open and welcoming rather than screened off.
View productEnquire about price
Horizontal Slat
Aluminium Horizontal Slat Single Gates
One leaf, hung on hinges, with flat aluminium slats running the width of the gate. The workhorse of side access — built to your opening rather than cut down from a stock size.
View productEnquire about price
Localities we work in across Ku-ring-gai
Gordon · Pymble · St Ives · Turramurra · Killara · Lindfield · Roseville · Wahroonga · Warrawee
This is a representative list rather than a boundary. If your suburb is inside the Sydney metropolitan area, ask — installation availability depends on the site rather than the postcode.
Nearby
Other Sydney service areas
Questions
Ku-ring-gai — questions we get asked
Which fence style copes best under trees?
Vertical slats or pickets. Water runs down the face rather than sitting on an upward-facing slat edge, and there is less horizontal surface for leaf litter to collect on. Under a heavy canopy that difference shows up over years rather than months.
Can you fence around established trees?
The fence itself is straightforward — post positions can be adjusted and bay widths varied to suit. Whether you are permitted to work near a protected tree is a council matter, so confirm it before finalising the design and tell us any constraints so the set-out works around them.